Math

Percentage Increase: Formula, Examples and How to Calculate It

Calcuonline · Updated · 5 min

A bar chart with four bars rising from left to right, an arrow climbing over them and a large percent sign

A percentage increase tells you how much a value grew compared with where it started: subtract the old value from the new one, divide by the old value and multiply by 100. If your rent goes from $1,500 to $1,620, it rose 8%. This guide explains the percentage increase formula, works through examples with prices, pay and inflation, and shows the mistakes that most often give the wrong answer.

The percentage increase formula

Percentage increase = (new value − old value) ÷ old value × 100

It takes three steps:

  1. Find the increase: subtract the old value from the new one.
  2. Divide by the old value: this compares the increase with where you started.
  3. Multiply by 100 to turn the result into a percentage.

This is the method the US Bureau of Labor Statistics uses for the Consumer Price Index: subtract the earlier index value from the later one, divide the difference by the earlier value and multiply by 100.

The key point is the divisor: you always divide by the old value, the one you are comparing against.

How to calculate percentage increase: examples

Back to the rent: it went from $1,500 to $1,620.

  1. Increase: $1,620 − $1,500 = $120.
  2. Divide by the old rent: 120 ÷ 1,500 = 0.08.
  3. Multiply by 100: 0.08 × 100 = 8%.

The same three steps work for anything that grows:

Item Old ($) New ($) Increase ($) Increase (%)
Rent 1,500 1,620 120 8
Salary 52,000 55,120 3,120 6
Coffee 4.00 4.60 0.60 15

The BLS’s own example works the same way with index points instead of dollars: the Consumer Price Index went from 278.802 in December 2021 to 296.797 in December 2022, an increase of 17.995 points, so prices rose 17.995 ÷ 278.802 × 100 = 6.5% in a year.

To skip the arithmetic, the percentage calculator answers “what percent of X is Y”: enter the increase ($120) as the part and the old value ($1,500) as the total, and it gives you the 8%.

Percentage decrease

When the new value is smaller, the same formula gives a negative number, and that is a percentage decrease. Most people write it as a positive number and say “decrease”:

Percentage decrease = (old value − new value) ÷ old value × 100

If a $60 pair of shoes now costs $45, the decrease is 15 ÷ 60 × 100 = 25%. For prices on sale, that is the discount percentage, and the discount calculator works the other way round: from the original price and the percent off, it gives you the sale price and how much you save.

Increasing a number by a percentage

Sometimes you know the percentage and need the new value: a 4% raise on a $52,000 salary, for example. Multiply by 1 plus the percentage as a decimal:

New value = old value × (1 + percentage ÷ 100)

$52,000 × 1.04 = $54,080. To decrease by a percentage, multiply by 1 minus it: a 20% cut on $54,080 leaves $54,080 × 0.80 = $43,264.

Common mistakes with percentage increase

  • Dividing by the new value. From $1,500 to $1,620, 120 ÷ 1,620 gives 7.4%, not 8%. Always divide by the starting value.
  • Thinking an increase and a decrease cancel out. A price that rises 25% and then falls 25% ends lower than it started: $100 becomes $125, then $93.75. A stock that loses 50% needs to gain 100% to get back to where it was.
  • Adding consecutive percentages. Two raises of 10% are not a 20% raise: $50,000 becomes $55,000 and then $60,500, a 21% increase in total, because the second raise applies to the higher salary.
  • Confusing percent with percentage points. If a mortgage rate goes from 4% to 6%, it rose 2 percentage points, but the rate itself rose (6 − 4) ÷ 4 × 100 = 50%. News stories about rates and polls usually mean percentage points.

Note: a percentage increase can be bigger than 100%. If a value goes from 20 to 50, it rose by 30, and 30 ÷ 20 × 100 = 150%: the new value is 2.5 times the old one, not 1.5 times. When the old value is 0, there is no percentage increase at all, because you cannot divide by zero.

Percentage increase vs percentage difference

A percentage increase has a direction: from an old value to a new one. When two values have no before and after, such as the prices of the same TV in two stores, people often use the percentage difference instead, which divides the gap by the average of both values. For $400 and $500, the difference is 100 ÷ 450 × 100 = 22.2%, while “the second store is 25% more expensive” (100 ÷ 400) is a percentage increase from the first price. Say which one you mean, because the numbers differ.

How to calculate percentage increase in three steps

  1. Subtract the old value from the new value to find the increase.
  2. Divide the increase by the old value.
  3. Multiply by 100, or let the percentage calculator work out what percent the increase is of the old value.

Calculators in this article